Amped-ESP32-Plus 
Amped-ESP32
What is it?
Amped-ESP32 and Amped-ESP32-Plus combine ubiquitous ESP32 with a PCM51XX series HiFi DAC, teamed up with a highly efficient TPA3128D2 D-class amplifier. It brings all the best from the HiFi-ESP32 model and adds an onboard amp to form a complete solution that can be paired with speakers directly, or an external amp/headphones
It uses an external power source to feed amps, so the host MCU uses an onboard drop-down converter. It has similar power capabilities to the Louder-ESP32 model, but it is much simpler to use since it only needs a valid I2S signal to operate, so a simple book example code will do it.
Use cases
Amped-ESP32 is a flexible, open-source audio platform designed to fit into both smart homes and custom audio projects.
- Smart Home Audio & TTS
Integrates with Home Assistant and Music Assistant for high-quality audio playback and text-to-speech announcements. Perfect for notifications, voice alerts, and whole-home audio driven by your smart home automations. - Multi-Room Audio with Snapclient
Use Amped-ESP32 as a Snapclient endpoint to create perfectly synchronized multi-room audio systems. Ideal for distributed music playback without proprietary lock-in. - Standalone Player with Squeezelite-ESP32
Run Squeezelite-ESP32 for a self-contained network audio player supporting Spotify Connect, AirPlay, and Logitech Media Server (LMS) — no external computer required. - Educational Projects & Teaching Platforms
A powerful tool for schools, universities, and technical education. Amped-ESP32 can be used to teach embedded systems, digital audio, networking, and open-source software — ranging from simple audio playback labs to advanced DSP, streaming, and real-time systems projects. - Research, Prototyping & Experimentation
Well-suited for rapid prototyping of audio devices, proofs-of-concept, and research projects involving DSP, low-latency streaming, wireless audio, or human-machine interaction. - A Foundation for Custom Products & DIY Builds
With all firmware and tooling fully open source, Amped-ESP32 is an ideal base for custom audio devices — whether you’re building a personal DIY project, a small production run, or a community-driven product.
Features
| Amped-ESP32 | Amped-ESP32 Plus * | |
| MCU | ESP32-WROVER-N8R8 | ESP32-S3-WROOM-N8R8 | ESP32-WROVER-N8R8 | ESP32-S3-WROOM-N8R8 |
| DAC | PCM5100A 32-bit Stereo DAC -100 dB typical noise level | PCM5122 32-bit Stereo DAC -112 dB typical noise level |
| Amp | TPA3128D2 D-class amp | TPA3128D2 D-class amp |
| Line-out | 2.1V RMS | 2.1V RMS |
| Output (4Ω, 1% THD+N) | 2x 40W | 2x 40W |
| Output (8Ω, 1% THD+N) | 2x 25W | 2x 25W |
| Output (Bridge, 3Ω, 1% THD+N) | 1X 60W | 1X 60W |
| DSP capabilities | ❌ | Digital volume, Analog gain, 6-band equalizer* |
| Flash/PSRAM | 8MB/8MB | 8MB/8MB |
| Connectivity | WiFi + BT4.2 + BLE + Ethernet | WiFi + BT4.2 + BLE + Ethernet |
⚠️Amped boards can’t drive headphones and speakers at the same time (unless you modify them)
💡Don’t need to connect speakers? Check out HiFi-ESP32
💡Don’t need to connect headphones or an external amp? Check out Loud-ESP32 and Louder-ESP32
* Plus model is in testing and will be available soon
Peripherals
- 0.96″, 128 x 64 px OLED Screen (optional)
- External Wi-Fi Antenna (optional)
- WS2812B RGB LED (optional)
- IR reader (optional)
- W5500 Ethernet (optional)
Onboard PSRAM
Audio streaming requires proper buffering to work, even with the ESP32’s 500K of RAM; it is a challenging task. For that reason, all Amped-ESP32 board versions have an 8 MB PSRAM chip onboard, connected via a high-speed interface.
Case
Amped-ESP32 and Amped-ESP32-Plus boards are mechanically compatible with Raspberry Pi 4 cases, and they are very easy to source
Optional Ethernet
Streaming high-bitrate audio over WiFi can be problematic in congested areas, so every board has a header that allows soldering in the W5500 SPI Ethernet module, which is very easy to source as well. The only downside is that with the module installed board will not fit the case unless it is impoved to accommodate extra height.
Firmware
- Home Assistant
Start from the web-installer, as soon as you configure WiFi, the boards will be discovered by the ESPHome add-in automatically. Dedicated configs can be found in the documentation for simple and stable media-player, experimental sendspin protocol, and experimental snapclient component - Squeezelite-ESP32
Flash directly from your browser using the web-installer, configure WiFi using Hotspot (default password: squeezelite). Don’t forget to exit Recovery mode when configured. - Snapclient
Flash directly from your browser using the web-installer, as soon as you configure the WiFi board will discover the snapserver automatically - Snaplient (edge)
Developer’s version of the snapclient, less stable and more feature-rich for those who cannot wait for new features to be released. Installed via web-installer, similar to standard snapclient - Your own software
Use Arduino IDE or Platformio IDE and the provided software samples
Documentation
Both software and hardware are fully open-sourced and can be found on the project’s GitHub. You can follow the project updates at Hackaday
Where to buy
You may support our work by ordering this product at Tindie and Elecrow
Sponsorship & Community Support
If you’re working on an open-source project, an educational initiative, or any pro-bono/volunteer effort, feel free to reach out for sponsorship details. I’ll do my best to provide discounts or even free boards.
Custom Design & Consultation
If you’re interested in a custom design based on or inspired by my boards, I also offer contract design work and consultation when needed.
